Labconco 3 ft. Protector Airo Benchtop Filtered Fume Hood, 31.7",w/HEPA Filter Only, 115V/230V, 50/60Hz, 10 or 5 Amp, with 2 Service Fixtures-1 GFCI Duplex Options

The Protector Airo Filtered Fume Hood requires no ducting and is available in 3' and 4' widths and 31.7" and 37.7" depths. Neutrodine® Unisorb Filtration Technology offers comprehensive molecular filtration. eGuard® communication software offers real-time monitoring on the user’s phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed.

Erlab-proven Neutrodine® Unisorb Filters are the heart of GFH Filtration Technology.

Benchtop models include a fiberglass panelized liner. Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration. Filters are sold separately. To determine if your application is right for a Protector Airo, please request a Chemical Assessment from a Labconco specialist who can recommend the appropriate enclosure and filters for your application.

Features (All Models)

• Eco-Foil™ air foil with aerodynamic Clean-Sweep™ airflow openings
• Cord-Keeper™ Slots on left and right side of air foil
• Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
• By-pass airflow design
• Glacier white powder-coated steel exterior
• Chemical-resistant, fiberglass-reinforced, composite panel liner
• Pre-wired vapor-proof LED lights for up to 63 foot candles rated for 50,000 hours
• eGuard2 software communication
• Factory-installed command module, fan button and light button
• Roughing prefilter
• Built-in exhaust fans to maintain 60 fpm face velocity at 16" sash opening height
• Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
• Sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
• Audible/visual alarms for breakthrough detection, temperature ≥40° C (104° F), fan failure and high sash position opening. At ≥60° C (140° F), all fans stop
• Single piece, tempered safety glass vertical-rising sash with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with airflow openings. Sash stop at 16" sash opening height on 4’ models and 13” sash opening height on 3’ models. Sash opens to 26" high for loading
• Factory-prepared for up to two electrical duplex receptacles and four service fixtures
• 28.5" high sightline from the work surface and header panel
• Power cord with plug

 Fixtured Models May Feature

• Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided
• One pre-wired GFCI electrical duplex receptacle on lower right side

 Required Accessories (Not Included)

• Neutrodine® Unisorb Filters (except HEPA only models which require HEPA filters). Number of filters required is determined by the width of the hood
• Work Surface
• Base Cabinet or Stand

 Options Available Include

• HEPA filter
• Region-specific electrical plug configurations
• Service fixtures

 Compliance

• SEFA 9, DHIII
• SEFA 8, Cabinet Surface Finish Tests
• Modified ASHRAE 110
• ANSI Z9.5-2011
• AFNOR NF-X 15-211
• ASTM E84-09C
• UL Standard 61010-1
• CAN/CSA C22.2 No. 61010-1

• Models available:
  • 3 ft Width:
    • Interior Depth: 25.3”
    • Exterior Depth: 31.7”
  • 3 ft Width:
    • Interior Depth: 31.3”
    • Exterior Depth: 37.7”
  • 4 ft Width:
    • Interior Depth: 31.3”
    • Exterior Depth: 37.7”
  • Sensor Packages available:
    • Solvent sensor
    • Solvent sensor + acid sensor
    • Solvent sensor + formaldehyde sensor
    • HEPA Filter only

• All models require (not included):
  • Neutrodine® Unisorb filters

Product Specifications

Standard delivery typically takes 5-7 business days, while expedited shipping takes 2-3 business days