Red Light, Near-Infrared, and Laser Therapy Devices
Ten years ago, light therapy in a clinic meant an infrared heat lamp on an articulating arm. Today the same category also includes LED panels with several thousand diodes, wearable wraps, sleeping-bag-style full body enclosures, and face masks. These are not variations on one product. They differ in what they emit, how much surface area they cover, and whether the patient sits in front of them, wears them, or lies inside them.
MediDepot’s Laser and Light Therapy Devices collection holds 14 configurations: 13 from iReliev spanning red light and near-infrared formats plus one laser therapy device, and the Mettler Electronics ME 5000 digital infrared heat lamp. The useful way to read the range is by coverage format rather than by brand, because that is what determines whether a device suits a single joint, a body region, or whole-body sessions.
Settings Where These Devices Are Used
Light therapy equipment turns up across clinical, athletic, and retail-wellness settings. This collection is a fit for:
- Physical therapy and rehabilitation clinics
- Chiropractic practices offering adjunct modalities
- Sports medicine practices and athletic training rooms
- Recovery studios, wellness centers, and cryotherapy facilities
- Med spas and aesthetic practices
- Gyms and performance facilities with recovery areas
- Practitioners assembling a take-home program for patients
The Fourteen Devices in This Range
The collection breaks cleanly into five coverage formats.
Full Body Panels The largest units in the range. The RL-191288010 is a full body red light and near-infrared panel rated at 2400 W with four wavelengths. The RL-W400-T is a 1500 W full body panel with 300 LEDs across five wavelengths. Both are floor-standing systems intended for standing or seated whole-body sessions.
Smaller Panel Systems The RL-110 FullGlow panel system carries 104 multi-chip LEDs at 660 nm and 850 nm. The RL-75L FullGlow panel system uses 75 dual-chip LEDs in the same red and near-infrared configuration. These suit targeted regional treatment or a smaller treatment room where a full body panel will not fit.
Enclosures and Mats The RL-7131 FullGlow 360 is a full body red light and near-infrared therapy bag carrying 2520 LEDs, which surrounds the patient rather than projecting from one side. The RL-D100Mat FullGlow 180 is a full body mat measuring 71 in by 31 in with 1280 LEDs, designed for a patient lying down.
Pads and Wraps The RL-D015-2 FullGlow therapy pad carries 240 LEDs across 7.87 in by 15.74 in. The RL-D079 FullGlow Universal Wrap is a wearable 16.1 in by 7.9 in unit at 660 nm and 850 nm. The RL-507-BLUE FullGlow Back Wrap uses 105 LEDs at 660 nm and 850 nm. The M3GN1-01-A red light therapy wrap is shaped for neck and shoulder use.
Targeted and Specialty Devices The RL-D050 FullGlow therapy hat carries 120 LEDs at 660 nm and 830 nm. The RL-Mask red light therapy face mask offers four LED modes and is positioned for anti-aging use. The RL-1000 PainIQ+ is the one laser therapy device in the collection, combining red light and infrared laser output. Separately, the Mettler ME 5000 is a digital infrared heat lamp delivering deeply penetrating thermal phototherapy, which is a heat modality rather than an LED device.
Panel, Pad, Wrap, and Full-Body Formats Compared
| Format | Devices in This Range | Coverage Area | Patient Position | Best-Fit Use |
|---|---|---|---|---|
| Full body panel | RL-191288010, RL-W400-T | Whole body, one side at a time | Standing or seated in front of unit | Clinic and studio whole-body sessions |
| Smaller panel | RL-D110, RL-75L | Regional | Seated or positioned near panel | Targeted areas in a compact room |
| Enclosure | RL-7131 FullGlow 360 | Surrounds the body | Inside the bag | Whole-body coverage without repositioning |
| Mat | RL-D100Mat, 71 in x 31 in | Full length, one surface | Lying down | Back, posterior chain, relaxed sessions |
| Pad and wrap | RL-D015-2, RL-D079, RL-507-BLUE, M3GN1-01-A | Single region | Wearable, hands free | Joint, back, neck and shoulder |
| Specialty | RL-D050 hat, RL-Mask, RL-1000 laser | Head, face, small targets | Worn or handheld | Scalp, facial, and pinpoint application |
Matching Format to Treatment Area
Selecting a light therapy device is mostly a question of surface area, session logistics, and whether the patient needs to stay still.
- Coverage area versus session time. A full body panel or the FullGlow 360 bag treats large areas in one session. Pads and wraps treat one region at a time, which means longer total time if several areas need attention.
- Hands-free or stationary. Wraps such as the RL-D079 Universal Wrap and RL-507-BLUE Back Wrap stay on the body, so the patient can move. Panels require the patient to remain positioned in front of the unit.
- Wavelength configuration. Most units in this range pair 660 nm red with 850 nm near-infrared. The RL-D050 hat uses 660 nm and 830 nm. The two full body panels carry four and five wavelength configurations. Confirm the exact wavelengths on each product page against your intended application.
- LED count and power draw. Output scale in this range runs from 75 dual-chip LEDs on the RL-75L up to 2520 LEDs in the FullGlow 360, and from unspecified wattage on wearables to 2400 W on the RL-191288010. Larger units need appropriate electrical capacity in the treatment room.
- Room footprint. Full body panels need floor space and clearance for the patient to stand. A mat or wrap can be stored between uses, which matters in a clinic short on dedicated rooms.
- Throughput. Practices treating many patients per day often favor a fixed panel with short sessions, while a wrap or pad suits a clinic that wants to apply light therapy while the patient receives another treatment.
- Light therapy is not heat therapy. The Mettler ME 5000 is an infrared heat lamp providing thermal phototherapy, a fundamentally different modality from LED red light and near-infrared devices. Treat it as a separate decision.
Wavelengths, LED Counts, and Coverage
| Category | Detail Available in This Collection |
|---|---|
| Total configurations | 14 devices |
| Product classes | Red light therapy (11), laser therapy (1), thermal phototherapy (1), heating pad format wrap (1) |
| Common wavelengths | 660 nm red with 850 nm near-infrared; 830 nm on the RL-D050 hat |
| Multi-wavelength panels | 4-wavelength (RL-191288010), 5-wavelength (RL-W400-T) |
| LED counts | 75, 104, 105, 120, 240, 300, 1280, and 2520 |
| Rated power on full body panels | 1500 W (RL-W400-T), 2400 W (RL-191288010) |
| Pad and wrap dimensions | 7.87 in x 15.74 in pad; 16.1 in x 7.9 in universal wrap |
| Mat dimensions | 71 in x 31 in (RL-D100Mat) |
Buyers should confirm irradiance, treatment distance, session timing, electrical requirements, and eye protection guidance directly on each product page and in the manufacturer’s instructions before use. MediDepot does not make claims about the effectiveness of light therapy for any specific condition and does not represent that any device satisfies a particular clinical, regulatory, or reimbursement requirement. These devices should be used according to their labeled instructions, and patients with photosensitivity, eye conditions, or who take photosensitizing medication should consult their clinician before use.
Buying Light Therapy Equipment Sensibly
Light therapy sits in an unusual position between clinical modality and consumer wellness product, which makes a few purchasing habits worth keeping.
- Buy for the area you actually treat. A full body panel is impressive and underused in a clinic that mostly treats knees and shoulders. Match the format to your real caseload.
- Check room electrical capacity first. A 2400 W panel is a meaningful load, and finding that out after delivery is an avoidable problem.
- Consider a clinic unit plus take-home wraps. Many practices run sessions on a panel in-clinic and offer wraps for patients to continue between visits.
- Read the specifications rather than the LED count alone. Diode count, wavelength mix, and treatment distance together determine what a device delivers, and a high LED count on its own says little.
- Plan cleaning and turnover. Mats, bags, and wraps contact the patient directly, so factor in wipe-down protocol and any covers between users.
- Keep the heat lamp separate in your planning. The ME 5000 serves a different clinical purpose and should be budgeted and justified on its own terms.
Frequently Asked Questions
What is the difference between red light and near-infrared in these devices?
Red light in this range is typically emitted at 660 nm and is visible, while near-infrared is emitted at 830 nm or 850 nm and is not visible to the eye. Most devices in this collection, including the RL-D079 wrap, RL-507-BLUE back wrap, and RL-D110 panel, combine both. The two full body panels carry four and five wavelength configurations. Check the specific wavelengths listed on each product page.
How is the laser therapy device different from the LED products?
The RL-1000 PainIQ+ is the only device in this collection listed under laser therapy, combining red light and infrared laser output. The other 11 red light products use LED arrays. Laser and LED devices differ in how the light is generated and delivered, and the manufacturer’s instructions should govern application, session length, and any eye protection requirements.
Which format should I choose for treating a single joint?
Wraps and pads are built for single-region use. The RL-D079 FullGlow Universal Wrap at 16.1 in by 7.9 in and the RL-D015-2 pad at 7.87 in by 15.74 in are both sized for a localized area, and the M3GN1-01-A is shaped specifically for neck and shoulder. These stay in place hands-free, unlike panel systems.
What is the difference between the full body panel and the FullGlow 360 bag?
Panels such as the RL-W400-T and RL-191288010 project light from one surface, so the patient faces the unit and typically turns to treat the other side. The RL-7131 FullGlow 360 is an enclosure with 2520 LEDs that surrounds the body, removing the need to reposition. The RL-D100Mat takes a third approach, treating the body from below while the patient lies on it.
Do these devices require eye protection?
Follow the manufacturer’s instructions for each device. Eye protection guidance varies by output, wavelength, and treatment distance, and it is specified by the manufacturer rather than something that can be generalized across a product range. This is particularly important with the higher-output full body panels and with the face mask and hat formats, where the light source sits close to the eyes.
Is the Mettler ME 5000 the same kind of device as the red light panels?
No. The ME 5000 is a digital infrared heat lamp providing thermal phototherapy, meaning its primary effect is deeply penetrating heat. The red light and near-infrared LED devices in this collection are a separate modality. A clinic considering both should evaluate them independently rather than treating one as a substitute for the other.
Find the Right Coverage for Your Patients
Because format, wavelength mix, and coverage area all shape what a device is practical for, it is worth comparing specifications against your treatment areas before ordering. MediDepot offers Medical Equipment Financing to help spread the cost of larger panel and enclosure systems, along with a Price Match Guarantee so you can order with confidence. Extended Warranty coverage is available on eligible equipment for practices that want protection beyond standard manufacturer terms, and a Military Discount is available for qualifying buyers. Browse the full Laser and Light Therapy Devices collection above, or contact the MediDepot team for help matching a format to your treatment room and caseload.