Labconco 3ft. Purifier HEPA Filtered/Class I Safety Enclosure, w/Airflow Monitor Option, 115V 60Hz / 230V 50-60Hz
Purifier HEPA Filtered Enclosures protect the user from agents that require Biosafety Level 1, 2 or 3 containment but no product protection.
Exclusive features include: ergonomic air foil with aerodynamic Clean-Sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil. Other features include:nominal inflow velocity of 75 to 105 fpm; 99.99% efficient exhaust HEPA filter; variable speed built-in blower with vibration-isolated impeller and solid state control rated for 2 amps; intrinsically-safe, negative pressure design; Minihelic pressure gauge; low discharge volume and quiet operation; epoxy-coated aluminum and steel construction; fluorescent lamp; switches for blower and light; 1/4" thick tempered safety glass front sash and sides; 9.44" high sash opening; ergonomic 10° angled and hinged sash that pivots upward, locks to a loading height of 20" and has side wiping seals to contain contaminants; two utility ports; particulate containment tested; and one-year warranty on parts and service.
Features
- Total exhaust from 155 to 310cfm, depending on hood width
- Sash pivots 10°, from 9.5 in. (24cm) operating position to 20 in. (50.8cm) opening for loading and maintenance
- Quiet variable-speed, solid-state internal blower maintains appropriate air velocity
- Airfoil with Clean-Sweep™ airflow openings
- Front-mounted pressure gauge monitors pressure differential against the HEPA filter
- HEPA filter is 99.99% efficient on 0.3μm particles (where applicable)
- Negative pressure design ensures containment—should a leak occur, the system traps the contaminated air and recirculates it through the filter
- 0.25 in. (6.4mm) Tempered glass side panels and sash
- Glare-free fluorescent lamp mounted outside contamination area
- Blower and light switches are front-mounted for easy access
- Powder-coated aluminum frame and steel rear plenum and zone-perforated rear baffle
- Back panel has two utility ports for service connections
- Open bottom allows enclosure to be placed on existing cabinetry or accessory dished work surface
Product Specifications
| Weight |
160.0 |
| Dimensions |
35.75" w x 28.64" d x 37.08" h |
| Electrical |
115 volts, 60 Hz, 3 amps, Domestic
230 volts, 50 Hz, 2 amps, International |
| Metric Weight (kg) |
73.0 |
| Airflow Monitor |
No Monitor / Included Monitor |
| Base Stand |
Required (Not Included) |
| Exhaust Volume |
165-230 CFM |
| Lighting |
Fluorescent |
| Nominal Sash Opening |
9.44" (23.6 cm) |
| Nominal Width |
3' (91.44 cm) |
| Power Cord and Plug |
North America, 115V, 15A
230V, 10A, No Plug |
| Protection Type |
Personnel |
| Conformance |
ETI |
| Product Subcategory |
Class I and Hepa Filtered Enclosures |
