Labconco 4 Feet Protector XL Benchtop Hood, 43.7" Exterior Depth, 100-115V/208-230V, 50/60Hz
Labconco 4 Feet Protector XL Benchtop Hood, 43.7" Exterior Depth, 100-115V/208-230V, 50/60Hz
Typically 1-3 Business Days
Registered & Certified Medical Equipment
Need help?
Typically 1-3 Business Days
Registered & Certified Medical Equipment
Need help?
Labconco 4 Feet Protector XL Benchtop Hood, 43.7" Exterior Depth, 100-115V/208-230V, 50/60Hz, w/2 Service Fixtures-1 GFCI Duplex Option
The Protector XL Benchtop Laboratory Hoods are general chemistry hoods that offer superior design flexibility. They are available in widths from 3 to 16 feet and three depths to meet a variety of installation and application requirements. These hoods incorporate containment-enhancing features allowing them to operate at face velocities as low as 60 fpm and meet the SEFA-1 standard of a low velocity high performance hood.
Features
- By-pass airflow design
- Eco-Foil Air Foil with aerodynamic Clean-Sweep™ airflow openings
- Cord-Keeper™ Slots on left and right side of air foil
- Glacier white powder-coated steel exterior
- Chemical-resistant, fiberglass-reinforced composite panel liner and Opti-Zone(TM) baffle with flame spread index less than 25 per ASTM E84. Baffle is removable for cleaning
- Tempered safety glass vertical-rising sash(es) with cable and pulley(s) and powder-coated aluminum sash handle(s). 8' models have optional split dual sashes. 10', 12' and 16' models have split dual sashes (four on 16' models)
- 37.5" (95.3 cm) high sightline from the work surface and header panel
- Removable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring
- Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
- Powder-coated stainless steel, 12.8" (32.5 cm) ID exhaust connection(s)
- 10', 12' and 16' models also feature a by-pass block
Required Accessories (not included)
- Remote blower
- Ductwork
- Work Surface
- Base cabinet or stand
Optional Accessories (not included)
- Service Fixture Kits (some models include service fixtures)
- Electrical Duplex Kits (some models include electrical duplex)
- Guardian Airflow Monitor Kits
- Distillation Grid Kits
- Snuffer™ Fire Extinguisher
- Ceiling Enclosure Kits
- Rear Finish Panel Kits
Product Specifications
| Product Type | Laboratory Fume Hood |
| Coating | Powder |
| Lighting Type | LED |
| Material | Powder-coated Steel |
| Amperage | 5 A |
| Certifications/Compliance | ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL |
| Depth (English) | 43.7 in. |
| Depth (Metric) | 80.5 cm |
| Dimensions (L x W x H) | 48.0" w x 43.7" d x 59.0" h |
| Flow Rate | 450 cfm |
| Height (English) | 59 in. |
| Height (English) Sash Opening | 18 in. |
| Height (Metric) | 149.9 cm |
| Includes | No Blower |
| Liner Material | Fiberglass |
| Service Valves | No Service Fixtures / 2 Service Fixtures |
| Voltage | 208/230 V or 100-115V |
| Weight (English) | 400 lb. |
| Weight (Metric) | 180 kg |
| Width (English) | 48 in. |
| Width (Metric) | 121.9 cm |
Standard delivery typically takes 5-7 business days, while expedited shipping takes 2-3 business days