A laboratory is only as safe and productive as the equipment protecting the people working in it. Fume hoods that don't contain vapors properly, freeze dryers that can't hold the right vacuum, or vacuum pumps that fail mid-run don't just slow down research, they put staff and samples at risk. Labconco has built its reputation over decades on laboratory containment and processing equipment engineered for exactly that kind of reliability, and MediDepot carries an extensive range of the brand's fume hoods, filtered workstations, freeze-drying systems, and vacuum pumps for labs that can't afford to compromise on equipment quality.
What makes this collection valuable to lab managers and procurement teams is depth of configuration. Labconco doesn't offer a single fume hood or a single freeze dryer; it offers dozens of width, voltage, fixture, and blower configurations so a lab can match equipment precisely to its space, its electrical infrastructure, and its workflow, rather than forcing a workflow to fit whatever equipment happens to be available.
Who Is This Brand For?
Labconco's product line is built for institutions and organizations running active laboratory operations where containment, ventilation, and controlled processing are part of daily work. This collection is a fit for:
- Hospitals with clinical or research laboratories
- Independent research laboratories and testing facilities
- Universities and academic research departments
- Medical clinics with in-house lab or sample processing needs
- Pharmaceutical companies handling formulation, testing, or quality control
- Biotechnology companies requiring containment and sample preparation equipment
Product Types
MediDepot's Labconco collection spans several equipment categories, each addressing a different part of the lab workflow.
Laboratory Fume Hoods and Laboratory Hoods
The core of the collection, including the Protector Premier, Protector I-S Premier, and Protector Pass-Through laboratory hood lines, along with the Basic 70 laboratory hood. These are available in 4-foot, 5-foot, 6-foot, and 8-foot widths, with configurations that include built-in blowers, ducted setups, explosion-proof blower options for flammable material handling, and pass-through designs with left and right side windows for hoods shared between two work areas.
Benchtop Hoods
Containment Units with smaller footprints tailored for laboratories that require local ventilation without the necessity of installing a complete fume hood at each workstation.
Filtered Workstations and Filtered Balance Stations
Ductless, filtered containment options for handling powders, balances, and applications where a full ducted fume hood isn't required.
Freeze Dryers, Freeze Dryers with Stoppering Tray Systems, and Freeze Drying Equipment
Equipment such as Lyophilizers for laboratories processing biological samples, pharmaceuticals, or any substance which requires freeze-drying. Stoppering Tray Dryer configurations ensure vials can be sealed in vacuum conditions prior to the opening of the chamber, which is critical for laboratories producing sterile and/or stable products.
Stoppering Tray Dryers and Cold Traps
Complementary equipment that supports the freeze-drying process, such as stand-alone stoppering tray dryers and cold traps that prevent vacuum pumps from getting exposed to moisture.
Laboratory Vacuum Pumps
Such as rotary vane vacuum pumps with exhaust filtration systems, PTFE lined vacuum pumps for corrosive or chemically reactive environments, and various rotary vacuum pumps suited for specific flow rates.
Aspiration Systems and Ventilation Stations
Additional equipment supporting fluid aspiration and localized ventilation needs within a lab environment.
How to Choose the Right Product
Selecting the right Labconco equipment depends on the specific application, available space, and existing lab infrastructure.
- Footprint. Fume hoods are available in 4 ft, 5 ft, 6 ft, and 8 ft widths. Match the width to your bench space and the number of researchers who need simultaneous access.
- Blower configuration. Choose between built-in blowers for a self-contained unit or ducted setups tied into building exhaust, depending on your facility's ventilation infrastructure.
- Explosion-proof requirements. Labs working with flammable solvents or vapors should look at hoods with an explosion-proof blower option rather than a standard blower.
- Shared workspace needs. Pass-Through hood configurations with left and right side windows are built for two researchers working from opposite sides of the same hood.
- Electrical requirements. Confirm your facility's voltage before ordering. Options across the collection include 115V/60Hz, 220V/50Hz, 100-115V, and 208-230V configurations, some with GFCI duplex outlets built in.
- Ductless vs. ducted containment. Filtered Workstations and Filtered Balance Stations suit labs without ducting infrastructure or applications that don't require full fume extraction.
- Freeze-drying application. Labs sealing vials under vacuum should prioritize a Freeze Dryer with Stoppering Tray System over a standard freeze dryer.
- Vacuum pump flow rate and chemistry. Match pump flow rate (for example, 195 liters/min on the collection's rotary vane pump) and construction, such as PTFE coating for corrosive-resistant applications, to your specific process.
Technical Information & Compliance
Labconco fume hoods and related containment equipment in this collection are engineered for laboratory ventilation and containment applications, with configuration options that vary by model. Documented specifications available on the collection page include:
| Category | Configuration Options |
|---|---|
| Fume hood widths | 4 ft, 5 ft, 6 ft, 8 ft |
| Voltage options | 115V/60Hz, 220V/50Hz, 100-115V, 208-230V |
| Blower types | Built-in, ducted, explosion-proof |
| Fixture options | Service fixtures, GFCI duplex outlets |
| Vacuum pump flow rate example | 195 liters/min (Rotary Vane Vacuum Pump with Exhaust Filter) |
Buyers should confirm current certifications, electrical requirements, and installation specifications directly on each product page, as configurations and available options vary by specific model and fixture package. MediDepot does not represent that any product satisfies a specific facility's regulatory or accreditation requirements; lab managers should verify equipment against their institution's own compliance standards before purchase.
Comparison / Selection Table
| Need | Recommended Product Type |
|---|---|
| Full ducted fume containment for a standard bench | Laboratory Fume Hood (Protector Premier or Basic 70) |
| Two researchers sharing one hood | Protector Pass-Through Laboratory Hood |
| Flammable solvent or vapor handling | Protector Premier Hood with Explosion-Proof Blower |
| Localized containment without full hood installation | Benchtop Hood |
| Ductless powder or balance handling | Filtered Workstation or Filtered Balance Station |
| Standard sample freeze-drying | Freeze Dryer |
| Sealing vials under vacuum | Freeze Dryer with Stoppering Tray System |
| Protecting a vacuum pump from moisture | Cold Trap |
| General lab vacuum applications | Rotary Vane or Rotary Vacuum Pump |
| Corrosive or chemically sensitive vacuum work | PTFE Vacuum Pump |
Smart Solutions for Equipment Purchasing
Fume hoods, freeze dryers, and vacuum pumps represent significant capital equipment purchases, so procurement teams benefit from planning ahead rather than buying reactively.
- Treat fume hoods as a long-term investment. These units are typically in service for many years, so it's worth specifying the right width, blower, and fixture configuration up front rather than retrofitting later.
- Plan for laboratory expansion. If your facility anticipates adding bench space or research staff, factor future hood and workstation needs into current electrical and ducting planning.
- Standardize equipment across departments where practical, so maintenance staff, consumables, and training stay consistent across multiple labs or locations.
- Budget for installation, not just the unit price. Ducted hoods and voltage-specific configurations may require facilities coordination that should be planned into your purchase timeline.
- Scale vacuum and freeze-drying capacity to actual throughput rather than defaulting to the largest available unit, to keep both upfront and operating costs proportional to real lab volume.
Frequently Asked Questions
What is the difference between a standard Freeze Dryer and a Freeze Dryer with Stoppering Tray System?
The standard freeze dryer extracts moisture from substances by applying vacuum and controlled temperature. The Freeze Dryer with Stoppering Tray System provides a function to stopper vials without opening the chamber and exposing the substances to air, which is essential when you produce sterile or moisture sensitive final products.
Do I need a ducted fume hood or can I use a Filtered Workstation instead?
It all depends on what kind of process you will conduct and your facility structure. Ducted Fume Hood exhausts air to the outside of the facility and it is needed when working with chemicals at a high hazard level. Filtered Workstations recirculate filtered air back to the facility and are used in facilities without ducting and applications with low hazardous materials, like handling powders.
What voltage should I order for my fume hood?
The available configurations for the product in this collection are 115V/60Hz, 220V/50Hz, 100-115V, and 208-230V. Make sure you have an appropriate electrical power supply in your facility because the blower and fixtures depend on the voltage configuration.
When should I choose an explosion-proof blower?
Laboratories using flammable solvent chemicals or producing high concentration of explosive vapors should go for a hood system that uses an explosion-proof blower and not a normal one, as normal blowers are not meant for those conditions.
What is the difference between a Pass-Through hood and a standard fume hood?
Pass-Through hood consists of side window openings left and right; thus it can be accessed through both windows, where two different people can work from each end of the same hood, unlike a regular fume hood that is accessed from only the front sash.
How do I choose the right vacuum pump for my lab?
Select a pump according to process requirements including flow rate such as 195 liters/minute flow rate of the Rotary Vane Vacuum Pump from this collection, and construction, PTFE-coated pumps for corrosive application and regular rotary vane or rotary vacuum pump for general purpose laboratories.
Why Buy Labconco Equipment from MediDepot?
Specifying the right fume hood width, blower type, and freeze-drying configuration takes some upfront planning, and the MediDepot team is available to help you compare options against your lab's actual space and electrical setup. For larger capital purchases, Medical Equipment Financing can help spread the cost of a hood installation or freeze-drying system across your budget cycle, and our Price Match Guarantee means you can order with confidence that you're getting a competitive price. Extended Warranty coverage is available for labs that want protection beyond the standard manufacturer terms, and a Military Discount is available for qualifying buyers. Take a closer look at the full Labconco collection above, or contact MediDepot for guidance on matching equipment to your lab's specific workflow.
