Myco Medical RELI®Needles, TECHNOCUT Blades, Sutures & Safety Disposables

Myco Medical Devices & Disposable

Who Uses Myco Medical Devices & Disposables?

Every day, in hospitals , ambulatory surgery centers , and clinics across the country, clinicians reach for needles, blades, syringes, and sutures they trust, or at least they should, because in procedural medicine there is no real margin for equipment that underperforms at the critical moment. Myco Medical , founded in 1993 and headquartered in Apex , North Carolina, has worked its way into the market by manufacturing clinical disposables that are consistent with that expectation. ISO 13485 certified , NMSDC recognized as a minority-owned business, and distributed through the major healthcare supply chains— including Vizient , HealthTrust, McKesson, Cardinal Health, and Henry Schein— Myco Medical’s RELI® product line supports some of the most demanding procedural settings in American healthcare. The clinicians and procurement professionals who rely on Myco Medical products include:

• Anesthesiologists CRNAs and pain management specialists who end up relying on RELI® Tuohy Point Epidural Needles plus RELI® Quincke Point Spinal Needles, for regional anesthesia delivery ,most days

• Operating room nurses and surgical technologists specifying TECHNOCUT® surgical blades and RELI-CUT® safety scalpels for general, and then also specialty surgical procedures

• Phlebotomists, infusion nurses, and IV therapy teams using RELI® EZ-Flash® Push Button Safety Blood Collection Sets for better ,more accurate one-handed safe venipuncture

• Interventional radiology and procedural medicine groups using RELI® Chiba Point biopsy needles for image-guided tissue sampling

• Surgical and wound care teams specifying REDI® absorbable and non-absorbable sutures for closing wounds, across general orthopedic and plastic surgery procedures, too

• Pharmacy and medication preparation staff drawing up meds with RELI® Blunt Fill Needles to help eliminate sharp-related reconstitution injuries

• Infection prevention and occupational health officers that need OSHA-compliant sharps safety programs, built around RELI® safety-engineered devices ,not just “typical” stuff

• Hospital materials managers and ASC supply chain directors trying to get consolidated clinical disposable sourcing, through one ISO 13485-certified supplier

Myco Medical gives procurement teams more than just one product, its actually the sort of bigger picture value: the reach of the RELI®, TECHNOCUT®, and REDI® product line means a hospital can collapse needles, blades, sutures, and blood collection items into one certified supplier . That helps reduce vendor complexity, brings standard documentation, and makes compliance management way easier across multiple procedure areas, kind of like one coordinated system rather than a bunch of separate deals.

RELI® Needles — Precision-Ground, Camera-Inspected, Procedure-Ready

The RELI® needle line is Myco Medical flagship product family, kind of full scope range of spinal, epidural, hypodermic, biopsy, and blunt fill needles designed around four core ideas: dimensional precision, a kind of visual confirmation, safety compliance, and latex-free, DEHP-free materials. Each RELI® needle goes through computerized grinding, with 100% visual camera checks before it finally leaves the manufacturing facility.

RELI® Tuohy Point Epidural Needle — Integrated & Detachable Wing Variants

The RELI® Tuohy Point Epidural Needle is Myco Medical’s most searched, and also the most visibly clinical product out there—its basically built for that exact tactile feedback and visibility needs regional anesthesia asks for, no matter what. It’s precision manufactured, designed around the Tuohy-style feel, you know, the smooth tissue advancement and the Tuohy curve behaving the way clinicians expect. With about 165,000 monthly searches for “epidural needle” nationally, this becomes the strongest organic search opening in the Myco Medical category right now.

• Available configurations: Integrated Wing (TUFW series) plus Detachable Wing variants — so anesthesiologist technique, and institutional preference can both be accommodated

• Gauge options: 16G up to 20G — covering the whole adult epidural anesthesia range, from start to finish

• Precision point grinding: Computer- controlled needle tip grinding helps keep bevel geometry consistent, for smoother penetration and reliable Tuohy curve performance

• Wide metric markings: High-visibility centimeter depth markings on the shaft — supporting accurate insertion-depth monitoring while identifying the epidural space. (Yeah, during that moment it matters)

• Color-coded stylet caps: A gauge-coded color identification system helps reduce selection errors especially in busy multi-gauge trays

• Stylet options: Comes with either a plastic stylet, or a metal stylet — aligning with institutional supply standards and also personal clinician preference

• Clear plastic hub: Improves tactile feedback and supports CSF/loss-of-resistance visualization

• Materials: Non-latex, DEHP-free — built to meet latex-safety requirements and chemical exposure compliance at the institutional level

RELI® Quincke Point Spinal Needles — Standard, Short Bevel & Metric Marking Variants

Spinal anesthesia and diagnostic lumbar puncture procedures need a needle that gives consistent bevel sharpness, less coring, and dependable stylet-cannula alignment. The RELI® Quincke Point Spinal Needle line kinda covers all that across a wide gauge and length range, so it’s not just one “kind of patient” thing.

• Gauge range: 18G through 27G — spanning the full spectrum from routine adult spinal anesthesia through pediatric work and more precise diagnostic uses

• Length range: 1.5" through 8" — for standard adult lumbar access plus longer- reach requirements in obese patients or when anatomy is tricky

• Exact stylet/cannula fit: Proprietary manufacturing tolerance keeps the stylet bevel aligned precisely with the cannula bevel, helping to reduce tissue coring and that complication risk that nobody wants

• Clear hubs: Transparent polycarbonate hubs allow immediate CSF visualization right after dural penetration — the flash type confirmation that placement is correct before injection

• Metric markings: Big, easy-to-see centimeter marks to track depth while inserting

• Short Bevel variant: Reduced bevel angle for cases where a more controlled tip advancement profile is needed

• Packaging: Sterile ( 25/box, 4 boxes/case); non-sterile bulk (100/box) for institutional cost efficiency

RELI® Chiba Point Needle — Biopsy & Interventional Procedures

• Gauge range: 18G through 25G — works for most CT-guided, ultrasound-guided and fluoroscopy-guided biopsy and aspiration tasks

• Length range: 3.5" through 10" — kind of covers standard-depth, plus deep retroperitoneal and thoracic approach needs

• Echogenic stylets: The stylet design helps keep ultrasound visibility stronger during real-time imaging guidance, so needle tip positioning feels more accurate and the procedure less “guessy“

• Depth stopper: Adjustable depth stopper lets you pre-set insertion depth control, during image-guided sessions

• Origin: Japan- sourced manufacturing for premium material and dimensional consistency, basically steady performance

• Applications: CT-guided fine needle aspiration, liver biopsy, lymph node sampling, thyroid FNA, and other interventional radiology procedures where needle visualization under imaging is required

RELI® Safety & Conventional Hypodermic Needles

• Safety Hypodermic (SHN): 18G–30G, 0.5"–2" — flip hinged safety shield, with one handed activation. OSHA compliant, non latex, DEHP free. It has a bevel orientation indicator, and it’s meant for clinical settings where sharps injury prevention mandates are a thing

• Conventional Hypodermic (CHN): 18G–30G, 0.5"–2" — typical wall design for smoother flow rate and better connection durability. Works with all standard Luer lock syringes, no fuss

• Pre-attached syringe combinations: Both safety, and conventional hypodermic needles, are available pre attached to RELI® Luer Lock syringes, for streamlined preparation and fewer connection steps . Makes the whole routine feel a bit quicker

• Blunt Fill Needle: 16G × 1.5" blunt needle for medication reconstitution — it helps eliminate the sharp related injury risk when drawing and reconstituting from vials, without needing extra syringe changes

RELI® Blood Collection Products — EZ-Flash® Technology and Push Button Safety

Venipuncture is basically one of the most high frequency clinical procedures in American healthcare, done millions of times each day across inpatient and outpatient spaces, plus diagnostic settings, you know. It’s also one of the most typical causes of needlestick injuries. RELI® blood collection products kind of cover both the accuracy side and the safety side of this whole clinical problem, in a way that makes sense.

RELI® Push Button Safety Blood Collection Set with EZ-Flash® Technology

• EZ-Flash® Technology: You get immediate blood flash visualization in the needle hub once the vein entry happens , so there’s a direct visual confirmation of successful venipuncture while the clinician keeps their grip on the wings. This tends to reduce hesitation and little technique errors, especially during tough draws.

• Push button activation: The single-handed push button safety mechanism deploys with an audible 'click' . That sound is basically the confirmation that the safety shield activated, no second hand needed, and no extra visual checking required.

• Gauge options: 21G, 23G, 25G with 12" tubing, covering the whole spectrum for adult needs , pediatric use, and fragile vein venipuncture requirements too.

• Color-coded wings: Each wing color matches the gauge so tray selection stays fast , even when you’re running high-volume phlebotomy.

• High flow rate: Needle geometry is tuned for an appropriate blood flow rate , for both collection and short-term infusion type uses ( <2 hours )

• Packaging: 50 EA/box, 4 boxes/case. Efficient box volume for high-frequency clinical routines, easy enough to keep stocked

• Safety Blood Collection Set (standard): Sliding mechanism option instead of a push button, for institutions that somehow prefer a different activation style, or already have clinical workflows built around slide-type safety butterflies

• Blood Transfer Devices: Male and female Luer versions, designed for OSHA-compliant closed-system blood transfer between collection sets and normal syringes , so you avoid open-system transfer and the typical exposure risk

• Safety Tube Holders: Integrated safety tube holders for a complete closed-system blood collection process, from venipuncture through tube filling, without extra handoffs

TECHNOCUT® Premium Surgical Blades and Safety Scalpels

Surgical blade quality basically decides how precise the incision really is, and also how much tissue trauma happens, plus it influences the overall procedure time more than people think. Myco Medicals TECHNOCUT® blade line uses automated grinding with proprietary polishing technology , and it maintains ISO-7740 / ISO 13485 compliance, to make a premium stainless steel blade that works in a consistent way across all the usual surgical blade sizes.

TECHNOCUT® Premium Stainless Steel Surgical Blades

• Available sizes: #10, #11, #12, #15, #15CA, #20, #21, #22, #23, #24, #25 — covering general surgery, orthopedic, ophthalmic, plastic surgery, and specialty procedure blade requirements

• Manufacturing: Automated grinding with proprietary polishing — producing consistent sharpness and edge geometry across every blade in a production lot

• Packaging integrity: Two VCI (Vapor Corrosion Inhibitor) strips per package maintaining blade sharpness and sterility through shelf life — a manufacturing detail that distinguishes TECHNOCUT® from standard commodity blade products

• FDA-inspected facilities: Manufacturing under FDA facility inspection standards for Class II medical device compliance

• Standards: Conforms to ISO-7740 and ISO-13485

• Packaging: 100/box, 10 boxes/case — institutional volume format

GLASSVAN® Carbon Steel and Stainless Steel Blades

• GLASSVAN® Carbon Steel: Traditional carbon steel blades for institutions and surgeons who prefer carbon steel cutting characteristics for specific tissue types and procedures

• GLASSVAN® Stainless Steel: Corrosion-resistant stainless steel variant for standard general surgical use

• GLASSVAN® Podiatry Blades: Specialty blade designs for podiatric procedures — specifically shaped for nail procedures, excisions, and debridement applications

• GLASSVAN® Miniature Blades: Reduced-size blades for precision procedures in ophthalmology, plastic surgery, and other microsurgical applications

• GLASSVAN® Carbon Steel Stitch Cutter: Dedicated blade geometry for suture removal — designed for clean, efficient suture cutting without tissue drag

RELI-CUT® & REDI-CUT® Safety Scalpels

• RELI-CUT Retractable Safety Scalpel with TECHNOCUT® Blade: Disposable retractable safety scalpel combining TECHNOCUT® premium blade performance with a retractable sheath mechanism — blade retracts after use for safe disposal, OSHA compliance, and handling safety

• REDI-CUT® Safety Scalpel with Retractable Sheath: Alternative retractable safety design for institutions standardizing on single-use fully disposable safety scalpel systems

• TECHNOCUT® Conventional Disposable Scalpel: Non-safety single-use scalpel for environments where safety scalpel requirements are not mandated, combining TECHNOCUT® blade quality with a disposable handle

REDI® Suture Line — Absorbable and Non-Absorbable Wound Closure

Myco Medicals REDI® suture line kind of covers both absorbable and non absorbable needs for wound closure, across general orthopedic gynecologic cardiovascular and plastic surgery use cases, and for reassurance 300 Series stainless steel needles are checked with 100% in line inspection, for quality assurance.

REDI® Absorbable Sutures

• REDICAPRONE® 25 PRO (PGCL): Synthetic absorbable with intermediate absorption profile — appropriate for subcuticular closure, fascia, and soft tissue approximation where medium-term tensile strength retention is required

• REDIDIOX® PRO (PDO): Polydioxanone synthetic absorbable with extended strength retention — used in procedures requiring longer wound support before absorption, including abdominal wall closure and orthopedic soft tissue repair

• REDIGUT® CHROMIC PRO: Natural chromic gut for applications where a natural absorbable material is preferred — including mucosal, cervical, and ophthalmic procedures

• REDIGUT® PLAIN PRO: Plain natural gut for rapid absorption applications including superficial mucosal closure

• REDISORB® FAST PRO (PGLA Fast): Rapid-absorbing synthetic for subcuticular skin closure, oral mucosal procedures, and other applications where early absorption is clinically preferred

• REDISORB® PRO (PGLA Standard): Standard polyglycolic acid suture — the most widely used synthetic absorbable material in general surgery, appropriate for general soft tissue approximation

REDI® Non-Absorbable Sutures

• REDIBOND® PRO (Coated Braided Polyester): Long-term permanent synthetic braided suture for cardiovascular surgery, tendon repair, and other applications requiring indefinite tensile strength maintenance

• REDILENE® PRO (Monofilament Polypropylene): Minimal tissue reactivity monofilament for vascular anastomosis, skin closure, and applications where suture reaction is a clinical concern

• REDILON® PRO (Monofilament Nylon): Classic synthetic monofilament non-absorbable for general skin closure, retention sutures, and orthopedic applications

• REDISILK® PRO (Natural Silk): Traditional natural braided silk for surgeons who prefer silk handling characteristics — used in cardiovascular, ophthalmic, and general surgical applications

• Needle types: Precision reverse cutting, conventional cutting, taper point, taper cut, and spatula needles — all 300 Series stainless steel with 100% in-line inspection

QLICKSMART® Sharps Safety — OSHA-Compliant Blade Disposal

• QLICKSMART® BladeFLASK: Non-sterile blade disposal system for safe single-handed scalpel blade removal — eliminates the most dangerous step in disposable blade management, the manual blade removal from handle after use. OSHA-compliant closed-system blade removal and contained disposal

• QLICKSMART® BladeFLASK Mounting Bracket: Wall-mounted bracket for fixed-location BladeFLASK deployment at scrub sinks, instrument prep areas, and sterile processing workstations — ensuring the safety removal device is always at point of use

Applications: Operating room scrub areas, sterile processing departments, procedure rooms, and any environment where reusable scalpel handles are used alongside TECHNOCUT® or GLASSVAN® blades

Why Source Myco Medical from MediDepot?

• ISO 13485 certified supply chain: All Myco Medical products manufactured under ISO 13485 quality management systems — providing the documentation and certification traceability that hospital supply chain compliance requires

• GPO contract alignment: Myco Medical is distributed through Vizient, HealthTrust, McKesson, Cardinal Health, and Henry Schein — MediDepot sourcing complements existing GPO purchasing strategies

• Consolidated clinical disposable sourcing: Needles, blades, sutures, blood collection, and sharps safety from a single ISO-certified supplier — reducing vendor management overhead and simplifying product documentation

• Institutional volume pricing: Volume pricing available for hospital systems, ASC networks, surgery centers, and multi-facility procurement programs

• OSHA compliance support: Myco Medical's full safety-engineered device portfolio supports institutional sharps injury prevention programs with documented OSHA-compliant alternatives across product categories

• Fast fulfillment: Standard 5–7 business day delivery on stocked clinical disposable lines

From the epidural suite to the operating room to the phlebotomy lab , Myco Medical RELI® and TECHNOCUT® products deliver precision, safety compliance and consistent quality that clinical teams as well as procurement managers rely on. Like, you know when everything has to be steady and repeatable.