Eppendorf CryoCube F101h 36.9" Ultra-Low Temperature Freezer, 101 L / 3.6 cu.ft, -50°C to -86°C Temperature Range, 115V or 230V Voltage Options, 2 Inner Doors, VisioNize Box

When it comes to maximizing sample storage capacity at the bench, the Eppendorf CryoCube F101h ULT freezer sets the standard: Up to 6,600 vessels below your bench in the lab with real -80 °C. By taking advantage of ultra-efficient, compact vacuum insulation panels which are used in combination with traditional PU foam insulation, we managed to slim down the freezer walls.

The Eppendorf CryoCube F101h offers a 2-compartment lay-out and two insulated inner doors for easy sample access and safe sample storage at -80 °C. The walls are 80 mm thick based on foam and vacuum insulation panels. The footprint is limited to half a square meter, especially designed for small labs. The temperature range for this -80 °C lab freezer is between -50 °C and -86 °C. The rails enable flexible positioning of the shelf, depending on your needs.

The ULT freezer has a volume of 101 L (3.6 cubic feet) and a temperature range from -50 °C to -86 °C. 

The most important aspect of long-term sample storage is safety. The CryoCube F101h freezer is equipped with reliable heavy-duty compressors (2-stage cascade cooling system). Quick pull-down times enable fast re-use after cleaning/defrosting of the instrument. The freezers have short recovery times after opening to provide extra sample safety (Door-Open-Recovery/DOR) when getting back to -80 °C. The temperature range of this ULT freezer is from -50 °C to -86 °C. Most users put the set point to -80 °C.

The automatic vent port enables fast re-access if needed.

For even higher sample safety, the ULT freezers can be equipped with CO₂/LN₂ back-up systems and a chart recorder. Temperature monitor systems can be used to monitor the freezers remotely.

Features

• Vacuum insulation panels allow for increased internal capacity with the same footprint as traditionally foamed freezers
• Inner doors are gasketed as well as insulated creating 2 separate compartments minimizing cold air loss while you access your samples
• Easy-to-read LED control panel and alarm status
• Special vacuum vent with plunger ergonomically located to gain immediate access to your freezer
• Inner doors can be quickly removed without the need for tools for easier and faster defrosting
• Full stainless steel interior for easy cleaning during maintenance and defrost cycles; powder-coated steel exterior
• Special low-temperature outer door seals allow gaskets to remain flexible at –86 °C and prevent ice buildup for easy access to samples
• Password protection of alarm and temperature setpoints to prevent unauthorized setting changes

Product Specifications

Standard delivery typically takes 5-7 business days, while expedited shipping takes 2-3 business days